If you're using a mixer with Pre-Cueing output, you won't need to set a channel specifically for it to work properly, as this will be done via the mixer. If you're not interested in using one or more of the available channels, you can also leave them set to "None". In this case, the audio of the different decks, as well as the Sampler, the Looper, and the Pre-Cueing output, can be routed through separate audio channels.
#DDJ 1000 DJAY PRO 2 WITH DJAY PRO 2 HOW TO#
For steps on how to do this, please see our Troubleshooting Guide.Įxternal mixer mode is meant to be used with any hardware mixer. If your controller does not show up automatically in the devices list, you may need to install a driver.
Most natively supported MIDI controllers are internal mixers.
The audio of both decks is directly sent out through the Main Output. When this mode is enabled, the two decks are mixed internally in djay. In internal mixer mode, you can select up to 4 audio channels (2 stereo channels). There you'll find options for routing the available audio channels.īelow, you'll find information about the differences between internal and external mixer modes, along with a list of supported controllers that should be used in each mode. To do so, open the djay Settings (press ⌘ +, ) and go to "Devices". But you can also manually configure your audio outputs in djay Pro AI. Generally, djay Pro AI automatically configures the optimal audio device settings when it detects that one of the natively supported controllers is connected.
0 kommentar(er)
